 |
|
Application of 3-dimensional printing implants for bone tumors
Jong Woong Park, Hyun Guy Kang
Clin Exp Pediatr. 2022;65(10):476-482. Published online 2021 Dec 23 DOI: https://doi.org/10.3345/cep.2021.01326
|
|
Citations to this article as recorded by
 Setting up a biomodeling, virtual planning, and three-dimensional printing service in Uruguay
Silvina Zabala-Travers, Andrés García-Bayce
Pediatric Radiology.2024; 54(3): 438. CrossRef 3D‐printed Multifunctional Guide Plate for Fenestration and Screws Drill in Proximal Femoral Benign Tumor
Yuxuan Zhang, Yi Guo, Zonghao Li, Bing Wang, Zhenfeng Li
Orthopaedic Surgery.2024; 16(6): 1487. CrossRef Emerging Innovations in Preoperative Planning and Motion Analysis in Orthopedic Surgery
Julien Berhouet, Ramy Samargandi
Diagnostics.2024; 14(13): 1321. CrossRef Osteochondroma-like parosteal osteosarcoma: A case highlighting diagnostic challenge and surgical advances
Naveed Majd, Raminta V. Theriault, Morgan A. Darrow, Steven W. Thorpe, Dillon C. Chen
Radiology Case Reports.2024; 19(9): 4091. CrossRef 3D-printing of porous structures for reproduction of a femoral bone
Giulia Alessandri, Gian Maria Santi, Paolo Martelli, Eleonora Guidotti, Alfredo Liverani
F1000Research.2023; 12: 17. CrossRef Application of 3D Printing in Bone Grafts
Adam Brachet, Aleksandra Bełżek, Daria Furtak, Zuzanna Geworgjan, Dawid Tulej, Kinga Kulczycka, Robert Karpiński, Marcin Maciejewski, Jacek Baj
Cells.2023; 12(6): 859. CrossRef Current Concepts in the Resection of Bone Tumors Using a Patient-Specific Three-Dimensional Printed Cutting Guide
Hisaki Aiba, Benedetta Spazzoli, Shinji Tsukamoto, Andreas F. Mavrogenis, Tomas Hermann, Hiroaki Kimura, Hideki Murakami, Davide Maria Donati, Costantino Errani
Current Oncology.2023; 30(4): 3859. CrossRef How 3D-Printing Is Changing RF Front-End Design for Space Applications
Oscar A. Peverini, Mauro Lumia, Giuseppe Addamo, Giuseppe Virone, Nelson J. G. Fonseca
IEEE Journal of Microwaves.2023; 3(2): 800. CrossRef A Snapshot of Current Updates and Future Prospects of 3D Printing in
Medical and Pharmaceutical Science
Rutvi Agrawal, Akash Garg, Rohitas Deshmukh
Current Pharmaceutical Design.2023; 29(8): 604. CrossRef Corrosion, fatigue and wear of additively manufactured Ti alloys for orthopaedic implants
J. Tjandra, E. Alabort, D. Barba, S. Pedrazzini
Materials Science and Technology.2023; 39(18): 2951. CrossRef Whole Blood Titanium Concentration after Limb Salvage Surgery with Three-Dimensional-Printed Ti6Al4V Implants
Jong Woong Park, Se Hoon Jung, Jung Hwan Yang, June Hyuk Kim, Sung Eun Oh, Hyun Guy Kang
Clinics in Orthopedic Surgery.2023; 15(5): 864. CrossRef Various Clinical Experiences of Three-Demensional Printing Bone Reconstruction
Jong Woong Park, Hyun Guy Kang
Journal of the Korean Orthopaedic Association.2023; 58(6): 491. CrossRef Clinical Experience of 3D Printing for Pelvic Bone Reconstruction
Jong Woong Park, Hyun Guy Kang
Journal of Korean Society of Spine Surgery.2023; 30(4): 131. CrossRef A Recent Review On 3D-Printing: Scope and Challenges with Special Focus on
Pharmaceutical Field
Shubham Singh, Mohit Kumar, Abd Almonem Doolaanea, Uttam Kumar Mandal
Current Pharmaceutical Design.2022; 28(30): 2488. CrossRef
|